SOFT Nail Lacquer System Designed Especially For Sensitive Nails presented in an attractive square shaped real crystal glass 15 ml bottle.

SAFE & SOFT. The following ingredients, formaldehyde, Toluene, Dibutylphtalate are not included in our Lacquers, due to the fact that it can cause allergic reactions and consequently durability is slightly less than in conventional lacquers.

Multi Base & Topcoat Functions:
Apply one coat of the Multi Base & Topcoat. Apply 2 coats of your chosen color. Apply 1 coat of the Multi Base & Topcoat as a further protection. (If you desire non-colored lacquer, then only apply2 coats of the Multi Base & Topcoat.)

French Red Creme
PLEASE NOTE: THE COLORED LACQUER CAN ONLY BE USED IN COMBINATION WITH THE MULTI BASE & TOPCOAT

Method of Application:
1. Before application, blend the contents, by slapping the bottom of the bottle with the palm of your hand, and then rolling it between your palms. This will prevent the build up of air bubbles on the surface of your nail during lacquer application.
2. Twist off the cap and wipe off the excess lacquer from the brush on the inside neck of the bottle. ATTENTION: ONLY APPLY 3 LINES OF LACQUER!

The fan technique
To create wide lines apply pressure to the brush, so it will spread out like a fan. Then to create narrow lines, release the pressure on the brush.
Application Apply one coat of the Multi Base & Topcoat. Apply two (2) coats of your chosen color. Apply 1 coat of the Multi Base & Topcoat as a final protection

A. Place the brush in the middle of your nail. Press down on the brush (so the brush spreads out like a fan)

B. Move the lacquer carefully down to the base of the nail. Stop when 1-2 mm from the cuticle.

C. Pull the brush back (spread out like a fan) toward the nail edge. Repeat this procedure again with the second and third brush stroke. See illustration. You decide yourself how hard you control the brush strokes. So you can draw both wide and narrow lines.